LIINI® | Operating Instructions & Step-by-Step

LIINI® Night station - Manual

Table of contents

Safety instructions

Important information on using the LIINI® Night station to protect you and your children.

Improper cleaning can not only impair the function of the night station, but can also lead to serious safety risks. Please clean your night station never put them in the dishwasher, do not use them in a sterilizer and and do not wash them under running water. Water entering the appliance can cause damage to the electrical components. This harbors serious dangers such as short circuits and can irreparably damage the product. Such damage is not only a risk for the appliance, but can also lead to fire, electric shocks or other accidents.
The LIINI® milk powder dispensers may be used for a maximum of 5 minutes in boiling water or sterilized in a sterilizer. If the 5 minutes are exceeded, the individual components may become deformed, resultingin leakage or loosening of the inner silicone part. In such a case, any warranty is excluded!
To ensure the longevity and safety of the night station, it is important that it is used in accordance with the manual and our manufacturer’s instructions.
The product may only be operated by adult persons. The LIINI® Night station must be kept safely away from children at all times.
The night station must be checked for defects before each use.
Do not use aggressive liquids for cleaning. This could lead to cracks or discoloration in the housing. In this case, the product must not be used under any circumstances!
Never touch the heating plate of the LIINI® Night station while it is being kept warm or for the first 5 minutes after use. severe burns!
The product must be kept away from your child’s hands at all times! Under no circumstances should your children play with the product.
Please check the milk temperature at night shortly before feeding using the wrist check .
For questions about your baby’s diet, please consult your doctor.

Technical data

All the technical details about the night station

Certifications

The LIINI® Night station has all the important approvals and meets the high safety and health standards of the EU & Switzerland.

CE-certified: Our night station is of course CE-certified and complies with the regulations applicable in the EU.
RoHs-certified: The night station has been thoroughly tested for harmful ingredients and meets the applicable maximum levels for hazardous substances.

Dimensions & software

Dimensions:

Diameter bottom: 108 mm
Heating area diameter: 83 mm
Height: 26 mm
Weight: 143g

Selectable bottle material:

Glass or plastic

Selectable drinking quantities:

80 / 120 / 150 / 180 / 240 ml

Selectable temperature levels:

37° / 40° / 45°C

Input:

The night station is operated directly from the power supply.

100-240V / 50-60Hz

Everything important before first use

Just a few more steps for restful nights

For baby bottles made of glass & plastic

The night station is suitable for all baby bottles. You can therefore feed your baby with the usual bottle teats.

After starting the device, you can specify whether you are using glass or plastic bottles. We have programmed the night station so that the different physical properties (insulation, thermal conductivity, etc.) of glass and plastic are taken into account.

This means you can use our product for both plastic and glass bottles.

Adjustable drinking volume

The LIINI® night station also has the option of adjusting the amount your baby drinks. You can choose from the following levels:

80 ml
120 ml
150 ml
180 ml
240 ml

Based on this information, the night station can keep the baby bottle as warm as possible at the desired drinking temperature. You can adjust the drinking quantity to your baby’s growth at any time.

Three temperature levels

In addition to specifying the bottle material and the amount to drink, you can choose from a total of 3 temperature levels:

37°C (For breast milk)
40°C
45°C

When choosing the drinking temperature, please follow the milk powder manufacturer’s instructions in order to achieve the best possible mixing with the powder.

When is the drinking temperature reached?

Our tests have shown that the drinking temperatures (37°C, 40°C, 45°C) are reached after about 3 hours on the night ward. This may vary slightly depending on the bottle size, bottle material and shape.

We therefore recommend getting to know the night unit during the first 1-2 weeks and adapting night-time feeding with the night unit to your own needs and the baby’s rhythm.

For this reason, an acoustic or visual signal to indicate the “correct” temperature was deliberately omitted in order to meet the individual needs of each child.

A simple wrist check of the liquid before feeding helps: if a slight warmth is felt, the bottle has reached the perfect drinking temperature for the child.

Under no circumstances should you use the outside temperature of the baby bottle as a guide!

Use with breast milk

Freshly expressed breast milk can be stored at room temperature (10-29°C) under very clean conditions (wash hands before expressing, clean breast pump) for up to 8 hours. This recommendation is based on ABM Clinical Protocol No. 8: Storage of Breast Milk, published by the Academy of Breastfeeding Medicine.

We recommend taking the breast milk out of the fridge immediately before going to bed and placing it on the night ward. In the first few months, babies typically need a night-time feed every 2-3 hours. Our practical tests have shown that keeping breast milk warm or reheating it for this period is not beneficial for our baby and the mother’s breast milk did not pose a problem.

The shelf life of breast milk can vary greatly and depends on many individual factors, such as the mother’s eating habits, health and lifestyle. We are therefore unable to make a general recommendation on the shelf life of your breast milk.

If you are unsure, we recommend consulting a pediatrician or midwife for individual advice and recommendations.

Help - my device switches off automatically!

Our night station is equipped with a child safety lock to ensure the safety of children and to enable automatic switch-off. There is a small button on the underside of the device that detects whether a baby bottle is placed on the station or not. If there is no baby bottle on the night station, the device switches off automatically after 5 seconds. When the baby bottle is placed on the night station, you will hear a soft click. This sound indicates that the childproof lock has been unlocked and the night station is working correctly.

Smooth surface: Make sure that the night station is standing completely on a smooth surface.
Even contact: The three rubber feet on the underside of the night station must rest evenly.
Avoid unevenness: Make sure that there are no table grooves or other unevenness at the exact height of the knob.
Hard surface: The night station must be placed on a hard surface (wood, stone, metal). The childproof lock cannot be unlocked on a soft surface (fabric).

Step-by-step instructions

Peaceful nights for you and your whole family explained step-by-step with pictures

1. Boil tap water

Boil the water for all night feeds in a pan or kettle before going to bed.

We recommend that you always boil a little more water – this way you will always have enough water if your baby is a little hungrier than usual during the night.

2. Fill baby bottle with water

Now immediately fill the baby bottle with the desired amount of hot, boiled water. The baby bottle will reach the baby’s drinking temperature range after approximately 3 hours.

For this reason, the baby bottle should be used for feeding after 3 hours at the earliest for feeding, as otherwise the water is too hot for the baby water is too hot for the baby (risk of burns).

Newborns: 30 ml per meal, approx. 7-8 baby bottles per day
From the 4th week of life: 80 ml per meal, approx. 7-8 baby bottles per day
From the 2nd month of life: 120ml per meal, approx. 7 baby bottles per day
From 3 months of age: 150ml per meal, approx. 6-7 baby bottles
From 4 months of age: 180ml per meal, approx. 5-6 baby bottles
From 5 months of age: Customized according to your baby’s needs

Please note that these are only general recommendations.

3. Prepare milk powder for the night

Now prepare the required amount of powder for the night feeds according to the manufacturer’s instructions. We recommend our LIINI® milk powder portioner, in which you can store the correct amount of powder for 4 baby bottles separately.

Preparation is even easier with the LIINI® milk powder attachments – you can store the attachment with the correct amount of powder in it directly on the baby bottle.

We recommend our LIINI® Night Bundles: You receive the LIINI® Night Station and the matching attachment for your baby bottles in a set of 4 and can therefore conveniently prepare all bottles for the whole night.

4. Unscrew the baby bottle teat

If you are using the LIINI® night station without the milk powder attachment, you can skip this step and continue with step 6.

Now screw the bottle teat to the LIINI® milk powder attachment.

Make sure that the sealing ring is inserted in the bottle teat.

This is the only way to guarantee that the baby bottle is 100% leak-proof!

5. Attach the milk powder dispenser

If you are using the LIINI® night station without the milk powder attachment, you can skip this step and continue with step 6.

Almost there! You can now screw the LIINI® milk powder attachment directly onto your baby bottle.

Important: There is an inserted sealing ringinside the milk powder attachment. Make sure that the ring is inserted before screwing it to the baby bottle. Otherwise, water will leak out during the night.

6. Select bottle material (glass or plastic)

Time to go to bed! 🙂

Our night station is equipped with a child safety lock to ensure the safety of children.

Place the night station completely on a hard and even surface (e.g. your bedside table) and now place your prepared baby bottle in the middle of the LIINI® night station. You will hear a soft click – this indicates that the childproof lock is unlocked.

Important: If you do not place the night station correctly, the night station will automatically switch off after 5 seconds for safety reasons because the childproof lock has failed to unlock!

You can start the device by pressing and holding the left area with the power icon for at least 3 seconds.

You can now choose between “GLA” and “PLA” by briefly touching the right-hand area of the baby bottle icon.

“GLA” stands for glass bottles
“PLA” stands for plastic bottles

Confirm your selection by tapping the power icon once.

7. Define drinking quantity

As soon as you have selected the material for your baby bottle, you will be taken to the next program step.

You can now specify how much your baby drinks. You can choose from the following drinking quantities:

80 ml / 120 ml / 150 ml / 180 ml / 240 ml

Here too, you can choose between the different levels by briefly touching the right-hand area next to the baby bottle icon. Confirm your selection by tapping the power icon once.

Choose the amount that comes closest to the amount your baby is currently drinking. For example, if your baby drinks 130 ml per bottle, select the 120 ml level.

8. Select your baby's drinking temperature

In the last step, select the desired drinking temperature for your baby.

You can select the following temperature levels:

37°C / 40°C / 45°C

Here too, you can choose between the different levels by briefly touching the right-hand area next to the baby bottle icon. Confirm your selection by tapping the power icon once.

9. Good night! 🙂

Now we wish you a very restful night with lots of sleep.

The night station now keeps the baby bottle at the desired drinking temperature until your baby is hungry again.

By the way – do you already know our LIINI® sleep aid for your baby?

With 5 different songs and 5 different sounds, you can gently accompany your baby to sleep.

10. Feeding the baby at night

With LIINI® milk powder attachment:

As soon as your baby wakes up in the night, you can take the baby bottle from the night unit.

You can open the inside of the milk powder attachment with a simple anti-clockwise twist. You can then mix the powder with the water using circular movements and feed your baby directly with the attachment screwed on. The attachment does not need to be removed!

Without LIINI® milk powder attachment:

Prepare the baby bottle as usual and add the desired amount of milk powder.

11. Prepare the next baby bottle

Put your baby back to sleep and prepare for the next feed.

Refill the baby bottle with the desired amount of milk, screw the prepared milk powder attachment onto the bottle and start the LIINI® Night Station again (from step 6).

Continue your sleep until the next feeding.

Good night! 🙂

12. Cleaning before the next use

During the day, you can now sterilize or boil the milk powder attachments used last night.

The LIINI® Milk powder dispensers may be used for a maximum of 5 minutes in boiling water or sterilized in a sterilizer.

If the 5-minute time limit is exceeded, the individual components may deform, resulting in leakage or loosening of the inner silicone part. In such a case, any warranty is excluded!

The night stationrequires no special care and is very easy to clean.

Wipe the heating area 2-3 times a week with a damp cloth – that’s it.

Correct cleaning of the LIINI® night station

For the longevity of the device and the safety of you and your children!

How to clean the night station

The night station requires no special care and is very easy to clean.

Wipe the heating area 2-3 times a week with a damp cloth – that’s it.

Improper handling can result in serious risks.

Therefore, please observe the following instructions to avoid danger:

No exposure to water: Immersing the night station in water or cleaning it under running water will result in unavoidable total damage. Such damage can lead to fires, electric shocks or other accidents. If water enters the product, it must not be used under any circumstances!

How to clean the milk powder dispensers

The LIINI® milk powder attachments may be used for a maximum of 5 minutes in boiling water or sterilized in a sterilizer.

If the 5-minute time limit is exceeded, the individual components may deform, resulting in leakage or loosening of the inner silicone part. In such a case, any warranty is excluded!

The dispensers must not be cleaned in the dishwasher!

Sealing ring in the milk powder attachment

Important to note to prevent leakage.

Check before screwing

All LIINI® milk powder attachments have an inserted sealing ring inside. This ensures that the connection between your baby bottle and the attachment is 100% leak-proof.

Note for use with MAM plastic bottles

If you combine the night station with MAM bottles, please note the following information

Select one temperature level higher

The anti-colic and sterilization system used by MAM is ideal for preventing collics and makes it easier to sterilize the baby bottle.

Our tests of the LIINI® night station in combination with the Easy Start plastic bottles from MAM have shown that the bottom valve of the baby bottles insulates the heat emitted by the night station very well.

For this reason, we recommend that you select one temperature level higher when using MAM plastic bottles:

If you want a drinking temperature of 37°C, program the night station to 40°C
If you want a drinking temperature of 40°C, program the night station to 45°C

Note for use with Philips Avent glass bottles

Please note the following information if you are using glass bottles

Do not screw too tightly!

If you use the milk powder attachments with Philips Avent glass bottles, it is important not to screw the attachment too tightly onto the bottle.

Due to the tolerances of the glass threads, it can otherwise happen that the attachment “overtightens”. It is completely sufficient to screw it on with only light pressure. Tightness is guaranteed even with light screwing.

You can test this by closing the attachment, filling the baby bottle with water and then screwing the attachment onto the bottle with light pressure. During the swivel test you will then see that the tightness is guaranteed.

Checking the temperature - correct method

Trust is good – control is better

Tolerances for heating temperatures

Taking into account the bottle material (glass or plastic) and the amount to be drunk, we succeeded in harmonizing the individual variables during the development phase. We have calibrated and adjusted the night station in several hundred measurements.

However, due to the large number of different baby bottles and corresponding shapes, materials, bottle thicknesses and functions, it is almost impossible to achieve the values without corresponding tolerances.

For this reason, we would like to point out that the displayed values can deviate by up to – / + 3°C.

We have tested the following baby bottles (glass and plastic versions) and can recommend them in combination with the night station:

Philips Avent
MAM
NUK First Choice
NUK Nature Sense
NUK Perfect Match
Medela

Guarantee

LIINI® stands for quality.

The products have a total warranty (guarantee) of 24 months from the date of receipt of the order. Wearing parts are completely excluded from the guarantee.

The following are considered wear parts:

Battery (The device’s battery has a service life of approx. 500 complete charging cycles. After that, the battery still provides approx. 80% of its original capacity).
Gaskets (adapters and bottle warmers)

The guarantee is also excluded:

If the defect is due to improper handling or use of the product other than its normal use.
To ensure the longevity and safety of the bottle warmer, it is important that they are used in accordance with the manual and our manufacturer’s instructions. We would like to point out that permanently connecting the battery-powered device to a power source over a longer period of time, especially overnight, will lead to an impairment of the battery performance and service life as well as to greatly increased wear and tear. In such a case, all guarantee and warranty claims are excluded!
If the defect is due to a malfunction caused by incorrect operation and not in accordance with the instructions in the respective user manual
described in the operating instructions.
If the defect is due to an external intervention “third-party intervention”, in particular repairs and interventions by persons who have not been authorized for this purpose by LIINI GmbH
have been authorized.
If the product has been damaged due towater contact / water damage.
Normal signs of wear and tear do not trigger any warranty.

LIINI GmbH can provide the guarantee either partially (e.g. spare parts such as seals) or complete replacement with an equivalent product.

For the purpose of verifying the warranty claim, the customer must solve a ticket under the corresponding category “Problem with device / defect” in the ticket system at www.LIINI.ch/support. and provide the following evidence:

Video on which the problem is apparent
Figure 1: Front of the device
Figure 2: Rear of the device
Figure 3: Bottom side of the device
Figure 4: Heating plate of the device

If LIINI GmbH detects corresponding damage to the device (e.g. misshapen heating plate, untypical scratches or dents, etc.) any warranty is excluded.

By submitting the ticket, the customer confirms that all information is true. Should it become apparent during the processing of the warranty case that facts of warranty fraud exist, LIINI GmbH reserves the right to take appropriate legal action.