LIINI® | User Guide for the NAPPY Changing Backpack by LIINI®

NAPPY by LIINI® - User Guide

Table of Contents

Safety instructions

Important information on using NAPPY by LIINI® to keep your children safe

The travel crib may only be used under adult supervision. Never leave a baby unattended while sleeping!
Under no circumstances should the crib be set up on raised surfaces or unstable ground!
Never place the crib near a fire (e.g., when barbecuing outdoors). The flying embers could set the crib on fire.
Set up the crib only at a safe distance from bodies of water!
If the changing backpack is attached to the stroller, make sure the stroller is stable at all times. For this reason, never leave the stroller unattended on slopes. Your baby’s movements could cause the stroller to tip over!
The baby bed comes with a sun canopy and a mosquito net. Nevertheless, the crib should not be set up in direct sunlight. There is a risk of overheating!

Product Information

All the technical details about the LIINI® baby carrier

Dimensions / Weight

NAPPY by LIINI® has almost as much space as a hiking backpack. With a 29-liter capacity, you can carry everything your baby needs on the go.

The dimensions are:

Backpack: 40 cm (height) x 32 cm (width) x 23 cm
Crib: 70 cm (length) x 30 cm (width) x 22 cm (height)
Changing pad: 74 cm (length) x 34 cm (width)

The curb weight is:

Approx. 2 kg, including changing pad and crib

Materials

For our changing backpacks, we use an innovative, high-quality blend of polyester and vegan faux leather. We do not use any animal-derived products whatsoever. Our products are 100% vegan!

The materials are very durable and easy to clean.

What can it hold?

Plenty of room for all your baby essentials—bring on the next family adventure!

You can fit all of that in your backpack

The diaper backpack is very roomy and has plenty of space for all your baby essentials.

2 baby bottles
1 LIINI® 2.0 bottle warmer
1 pack of wet wipes in a separate compartment
10 diapers
1 children’s book
1 wallet
1 smartphone
1 power bank
1 water bottle
1 baby rattle or children’s toy
1 LIINI® milk powder scoop
1 spare outfit
Various Snacks (grain bars, etc.)
Baby food

Everything you need to know before first use

Just a few more steps, and NAPPY by LIINI® will be there for you and your baby every day.

Check scope of delivery

Congratulations on purchasing your NAPPY by LIINI® diaper backpack, and a warm welcome to the LIINI® family. First, we recommend that you check the contents of the package. With your purchase, you’ll receive:

Cotton bag for protection against dirt and for transport
Diaper backpack
Changing pad
Crib
Baby mattress
2 metal clips for the stroller
USB-C cable for charging LIINI® or other electronic devices

Prepare the USB port

NAPPY byLIINI® features a built-in USB port for all your electronic devices.

The package includes two cables:

Cable 1: Connection between your power bank and the fixed port inside the baby carrier
Cable 2: Connection between the fixed port on the baby carrier (outside) and any electrical device

Before using the carrier for the first time, the USB cable (inside) must be securely attached to the designated holder in the baby carrier. To do this, simply snap the cable into the guide (see image) and connect your power bank to your backpack, for example.

Assembling a crib: Step-by-step

With this convenient travel crib, you can put your baby down for a nap anywhere—perfect for when you’re on the go.

1. Unzip the zipper

Place the entire backpack on a flat surface (such as a lawn) and open the zipper all the way.

To unfold the crib, make sure the zipper is unzipped.

Please follow the safety instructions for assembling the crib.

2. Make up the crib

Once you’ve fully unzipped the zipper, you can spread the crib out to cover the entire sleeping surface.

3. Connect the plastic rods

To reinforce the baby crib, plastic rods are inserted into the side panels on both sides.

To do this, simply push the plastic sticks together in the middle.

4. Insert the plastic rods

All you have to do now is insert the connected plastic rods (2 in total) into the guides provided in the side panels of the crib (see picture).

5. Preparing the baby's sleeping area

The baby bed, of course, comes with a built-in sunshade and mosquito net — very handy in the summer and for protection against mosquito bites. The sunshade can be easily rolled out and secured on the opposite side with a Velcro fastener.

Don’t forget to unroll the baby mattress that came with it .

The crib is now fully assembled, and you can put your baby to bed.

Storing a Crib - Option 1: Step-by-Step

Has your baby had a rest? Then it’s time to put the crib away again.

1. Roll up the sunroof and insect screen

The best place to start is by putting away your sunscreen and insect repellent. You can roll up the sunshade and insect screen and secure them again with the Velcro fastener.

You can also roll up the baby mattressagain and tie it with the sewn-in strings.

2. Pull out the plastic rods

Now you need to remove the plastic rods from the crib. To do this, use one hand to grasp the plastic rod on the side with the opening (right hand in the picture) and carefully pull it out.

To make pulling it out as easy as possible, use your other handto help push the rod (left hand in the picture).

3. Fold up the crib

To close the changing backpack, you’ll need to fold up the changing pad and zip it closed.

The zipper must be threaded cleanly and completely at the start .

Be careful not to trap any fabric while closing the door .

4. Stow the poles

Once both rails have been completely removed from the crib, you can pull them apart in the middle and fold them up.

Then tuck the bars into the crib compartment and close the zipper completely.

5. See you on the next outing 🙂

Once both rails have been completely removed from the crib, you can pull them apart in the middle and fold them up.

Then place the bars in the crib compartment and close the zipper completely.

Storing a Crib - Option 2: Step-by-Step

It is not necessary to remove the plastic bars from the crib when folding it up.

1. Roll up the sunroof and insect screen

The best place to start is by putting away your sunscreen and insect repellent. You can roll up the sunshade and insect screen and secure them again with the Velcro fastener.

You can also roll up the baby mattressagain and tie it with the sewn-in strings.

2. Pull the plastic rods apart

Unlike option 1 (see above), you can also leave the plastic rods in the side rails of the crib.

To do this, hold the plastic rod firmly in the middle with one hand—then use your free hand to pull the plastic rod out about 5 cm on the side of the opening so that the rods are no longer connected.

3. Cross the plastic rods

Once you’ve separated the plastic rods on both sides, you can fold them together in an “X” shape —that is, crosswise —and store them inside the crib.

Folding it into a cross shape takes a little practice. But after just a few tries, you’ll get the hang of it.

If this method seems too complicated to you, we recommend removing the bars completely from the crib (see above).

3. Close the zipper

Once you’ve crossed the bars, you can fold up the crib and zip it closed.

Please be careful not to pinch any fabric parts of the backpack while closing it.

Important: The zipper must be fully threaded before closing (see image).

Correct cleaning

How to clean your diaper backpack

Hand wash only / do not tumble dry!

NAPPY byLIINI® must be washed by hand only.

We recommend using standard laundry detergent for cleaning. For stubborn stains, you can work the detergent into the fabric using circular motions before wiping the stained area clean.

It is best to let the diaper backpack air dry in the fresh air, in direct sunlight, after hand washing. Under no circumstances should the diaper backpack be machine-dried.

Warranty

LIINI® stands for quality.

The products are guaranteed for a total of 24 months from receipt of the order. Signs of wear and tear resulting from the use of the baby carrier are completely excluded from the warranty.

The following are considered signs of wear :

Material wear and tear
Stains caused by dirt

The warranty is also excluded:

If the defect is due to improper handling or use of the product that does not correspond to normal use.
If the defect is due to a malfunction caused by incorrect operation and is not in accordance with the instructions in the relevant user manual
described in the operating instructions.
If the defect is due to external intervention, in particular repairs and interventions by persons not authorized by LIINI GmbH
have been authorized.
If the product has been damaged due to improper cleaning (e.g., in the washing machine).
Normal signs of wear and tear do not invalidate the warranty.

LIINI GmbH can provide the warranty either by partial (e.g. spare parts such as seals) or complete replacement with an equivalent product.

In order to check the warranty claim, the customer must open a ticket under the corresponding category “Problem with device / defect” in the ticket system at www.LIINI.ch/support and provide the following evidence:

A photo showing the damaged part of the baby carrier

If LIINI GmbH discovers any damage to the appliance (e.g. misshapen heating plate, untypical scratches or dents, etc.), any warranty is excluded.

By submitting the ticket, the customer confirms that all details are true. LIINI GmbH reserves the right to take appropriate legal action should it become apparent during the processing of the warranty claim that there is evidence of warranty fraud.