Deutsch | English | Français | Italiano

Free shipping from 30 € / CHF

Already over 30'000 satisfied parents

Ordered by 12.00 - dispatch on the same day (Mon-Fri)

LIINI Logo

Prepare baby bottle on the go

Do you want to finally get some fresh air after a strenuous birth and the puerperium, visit friends or your parents? That is absolutely understandable and can only be recommended. There are several important points to keep in mind when you are out with your baby. What temperature does the bottle have to be for the baby? What happens if the milk gets too hot? Can’t I just give the bottle cold? You can find this and other helpful information in this post 🙂

The important things first:

The ideal drinking temperature for your baby is approx. 37° – this corresponds roughly to the temperature at which the baby would drink straight from the breast. When you are out with your baby, the best way to check the temperature is to put a drop of breast milk / powdered milk on your inner wrist (where your wrists are). The bottle is at the ideal temperature when you feel neither warm nor cold. But be careful: This procedure is often very imprecise and depending on the outside temperature (e.g. in summer) not really meaningful.

Preparation on the road – but how?

We still remember exactly when we wanted to feed our little one for the first time on a short walk on Lake Biel. After just five minutes of walking, she woke up from her sleep and was immediately hungry / thirsty. As new parents, we of course forgot the thermos with hot water at home. The chaos was inevitable: In no time at all we had to look around with a crying baby for a restaurant nearby to get hot water.

Here we have already reached the first big advantage of LIINI®: With our bottle warmer for on the go, you don’t need to lug around a thermos, a thermometer or even a container !

Prepare baby bottle on the go

Source: LIINI GmbH / Typical excursion with baby
The picture shows you what it normally looks like when you’re out and about with a baby without LIINI®. You need a thermometer, a thermos flask with hot water, a container to warm the bottle, and of course the bottle itself. Why so complicated when it is much easier thanks to the LIINI® bottle warmer?

Feeding the baby on the go with LIINI®

Our bottle warmer relieves you yours next excursion guaranteed with the baby. Whether on a hike, a walk by the lake, visiting your grandparents or having a delicious meal with friends – the LIINI® cup warmer has become indispensable. Of course, it is also ideal for you next restaurant visit suitable.

We would be happy to show you the advantages of LIINI® on:

  1. If you are out with your baby, Do you need no heavy thermos, no thermometer and no storage container more. You can use liquid food for your baby without water bath heat.
  2. LIINI® warms breast milk or breast milk substitutes or other liquids within five minutes to the perfect drinking temperature!
  3. If your baby decides against acute hunger, the cup warmer keeps the milk automatically on the Temperature of 37° and the for several hours. This will allow your baby to drink later.
  4. You can use the LIINI® anytime in the car or with a power bank On the way easy to charge.
  5. thanks to the small and handy Designs, the LIINI® bottle warmer fits in every diaper bag.
  6. Also the cleaning is straightforward and easy. You can easily wipe the surface with a damp cloth, for example.

Baby is hungry in the restaurant

Are you indulging in a delicious meal in a restaurant again? But what do you do when your baby is suddenly hungry? To heat the bottle in the restaurant, you have to ask the service staff for a jug of hot water. Often more difficult than expected after Corona and the reopening of the restaurants. The service staff is usually very busy and it is not uncommon that your request for hot water is simply forgotten. Please don’t get it wrong: The staff do a good job and are busy serving the other guests.

But your baby doesn’t really care: When the hunger is there, it wants the bottle – and as soon as possible. When the jug with the water is finally brought to the table, the water is often only lukewarm. Then it feels like an eternity to prepare the bottle in the restaurant – especially when the baby gets impatient and starts screaming.

Restaurant with baby

Image source: LIINI GmbH / Relaxed restaurant visit thanks to LIINI®

Baby bottles in the restaurant

Of course, you can also use our products easily and without stress in the restaurant.

The next time you go to a restaurant, all you have to do is make sure you get it charged take with you. the Vials you can do it best prepare at home . Ie fill the breast milk into the bottle and preferably take it with you chilled (in a small cool box). For Recommend powder milk we, already at home that boiled and then cooled water to fill into the vial and the Add powder only after heating.

Then when your baby is hungry, you can Screw the baby bottle without the lid / teat to the LIINI® warmer. The LIINI starts with just one push of a button ® to warm the milk and you can feed your baby within a very short time 🙂

LIINI® is also a must-have for your home!

There is a high probability that you have a bottle warmer with a water bath for use at home. The following problems are probably familiar to you:

  • It takes a half eternity until the water finally heated up is. With a crying baby Minutes feel like hours.
  • the water evaporates with every heating and always has to refilled will.
  • The warmer is constantly calcified and yields so not more the full power.
  • You put the bottle in the water bath and do something else for a moment, come back and discover with horror that the milk is already there way too warm is. In addition to the important nutrients that may have already been lost, you now need the milk to cool in a cold water bath ask and the procedure takes even longer.
  • You put the bottle in each case open minded in the warmer so that you can keep track of the temperature with the thermometer. You missed that too much water was contained in the warmer, which now runs into the milk and thus the meal is unusable.

With the LIINI® these problems are a thing of the past! Integrate the LIINI® bottle warmer instead of a conventional bottle warmer fixed in your kitchen and close him on Power grid so he always fully charged is when you need it on the go.

Temperature baby bottle

Image source: LIINI GmbH / conventional bottle warmer

Buy milk warmer / cup warmer in the shop now

You can of course find all of our products in our Shop . Most of the baby bottles available in stores are compatible with the LIINI® (a list can be found in the shop).

If you are using a baby bottle brand that does not fit directly on the LIINI®, that is not a problem. Simply buy the corresponding adapter.

PS: The LIINI® is also perfect as a present for new parents! 😉

How to find the perfect ring size

Do you already have another ring at home?

Yes - measure ring

If you already have a good fitting ring, you can use that to determine the size.

Step 1: Prepare material

  • An existing ring that fits well
  • A ruler or tape measure
  • A pen and a sheet of paper

Step 2: Measure the existing ring

Lay the existing ring flat on a flat surface. Make sure that it does not deform or twist. Use the ruler or tape measure to measure the inside diameter of the ring. This is the distance from one inner edge to the opposite inner edge of the ring. Note the measurement in millimeters.

Step 3: Compare with our size chart

Now compare the measurement you noted with our size scale and choose the appropriate ring size.

No - Measure finger

If you don’t have a matching ring at home, you can easily determine your size with the following procedure.

Step 1: Prepare material

  • A thin strip of paper or a piece of string
  • A pen
  • One pair of scissors
  • A ruler or tape measure

Step 2: Measure the circumference of the finger

Wrap the thin strip of paper or string around the finger you want to wear the ring on. Make sure the strip fits snugly, but not too tight or too loose. Use a pencil to mark the place where the strip or string overlaps.

Step 3: Check the size

To make sure that the determined ring size is correct, you can wrap the thin paper strip or string around your finger again and place the ring on it. Check that it fits comfortably and is not too loose or too tight. Repeat this step if necessary to find the optimal size.

Tip: If you want more accurate measurements, you can repeat the process several times and take the average of the measurements.

Step 4: Compare with our size chart

Now compare the measurement you noted with our size scale and choose the appropriate ring size.

Size chart

Size Inner diameter
1 16.5 mm
2 17.3 mm
3 18.1 mm

LIINI® Ring template

Don’t worry too much about your ring size.

After your order you will immediately receive our LIINI fingerprint kit.

Included are original and pre-cut ring templates to try on.

So you can always change to a smaller or larger ring before engraving in the worst case.