LIINI® is a warmer for your baby’s bottle – without annoying cables – for use at home, in a restaurant, with relatives or anywhere else. Thanks to the battery operation, it is now possible to warm up your baby’s food without any hot water.
We recommend the use of LIINI® for baby bottles with a content of up to 200ml. It should be noted that the time it takes to warm up the baby bottle depends on the initial temperature and the size of the contents.
We recommend the use of LIINI® exclusively for breast milk or water for breast milk substitute products.
No! Breast milk or water straight from the refrigerator (around 3-5 °) is not suitable for heating with LIINI®. The battery power is too low for this. LIINI® was designed for traveling, in restaurants or e.g. B. for visiting friends designed.
LIINI® is available in the following two versions:
- Little Princess
- Babyboy
Our products have been tested by an independent certification body with regard to environmental and health protection as well as user safety. The products meet all EU requirements. If necessary, the certificate can be requested from us at any time.
RoHS means “Restriction of Certain Hazardous Substances” or in German “Guideline for the restriction of dangerous substances” in the area of electronic devices. The certification confirms that the limit values for environmentally harmful and difficult to dispose of raw materials / materials are complied with.
Our products were dismantled into all individual parts (over 80 parts!). Then each individual part was checked for the permitted limit values. Upon request, this RoHS certificate can be requested from us at any time.
The FCC certification is proof for the American market. It goes without saying that our products also meet US standards. This certificate can also be viewed by us at any time.
No! In the production we use special plastics that absorb the heat. Burning is therefore not possible.
We recommend charging LIINI® once a day.
Absolutely! Only materials that are 100% harmless or non-toxic are used in production. The products are certified.
Definitely! With our milk warmer you can heat both breast milk and powdered milk from different manufacturers. Please note the preparation temperature recommended by the manufacturer (usually 40-45 °).
However, it is important to note that LIINI® is not suitable for heating breast milk from the refrigerator (by around 3 °). The battery power is too weak for this.
LIINI® is very handy with the dimensions 70×70 mm (diameter x height) and fits in every diaper bag.
If you use a baby bottle from the following manufacturers, you can screw it directly to the cup warmer and you DON’T need any adapter:
- AVENT
- NIP
- Chicco
The sealing ring can be used in two different ways. The installation direction depends on the brand of baby bottle. If you are unsure, you will find an overview below:
For our Reference measurements do we have Tap water with approx. 25 ° C used. One 120ml Baby bottle must be approx. 6 minutes (Our test showed 6 minutes and 7 seconds) with LIINI® until the baby bottle is at 37 ° C.
Important NOTE: Please note that the Warm-up time to the desired temperature due to different Ambient temperatures , the Bottle size (small or large baby bottle), des Bottle material (Glass or plastic) as well as the Starting temperature extend or r can shorten.
* This measurement of approx. 6 minutes also serves as a reference information on the product packaging and in the operating instructions.
For our Reference measurements do we have Tap water with approx. 25 ° C used. One 150ml Baby bottle must be approx. 7 minutes and 30 seconds (Our test showed 7 minutes and 34 seconds) be heated with LIINI® until the baby bottle is at 37 ° C.
Important NOTE: Please note that the Warm-up time to the desired temperature due to different Ambient temperatures , the Bottle size (small or large baby bottle), des Bottle material (Glass or plastic) as well as the Starting temperature extend or r can shorten.
For our Reference measurements do we have Tap water with approx. 25 ° C used. One 150ml Baby bottle must be approx. 8 minutes and 30 seconds (Our test showed 8 minutes and 27 seconds) with LIINI® until the baby bottle is at 37 ° C.
Important NOTE: Please note that the Warm-up time to the desired temperature due to different Ambient temperatures , the Bottle size (small or large baby bottle), des Bottle material (Glass or plastic) as well as the Starting temperature extend or r can shorten.
For our Reference measurements do we have Tap water with approx. 25 ° C used. One 240ml Baby bottle must be approx. 11 minutes (Our test showed 11 minutes and 22 seconds) be heated with LIINI® until the baby bottle is at 37 ° C.
Important NOTE: Please note that the Warm-up time to the desired temperature due to different Ambient temperatures , the Bottle size (small or large baby bottle), des Bottle material (Glass or plastic) as well as the Starting temperature extend or r can shorten.
For our Reference measurements do we have Tap water with approx. 25 ° C used. One 120ml Baby bottle must be approx. 8 minutes (Our test showed 8 minutes and 3 seconds) with LIINI® until the baby bottle is at 40 ° C.
Important NOTE: Please note that the Warm-up time to the desired temperature due to different Ambient temperatures , the Bottle size (small or large baby bottle), des Bottle material (Glass or plastic) as well as the Starting temperature can lengthen or shorten.
For our Reference measurements do we have Tap water with approx. 25 ° C used. One 150ml Baby bottle must be approx. 11 minutes (Our test showed 11 minutes and 12 seconds) be heated with LIINI® until the baby bottle is at 40 ° C.
Important NOTE: Please note that the Warm-up time to the desired temperature due to different Ambient temperatures , the Bottle size (small or large baby bottle), des Bottle material (Glass or plastic) as well as the Starting temperature can lengthen or shorten.
For our Reference measurements do we have Tap water with approx. 25 ° C used. One 180ml Baby bottle must be approx. 13 minutes (Our test showed 12 minutes and 58 seconds) be heated with LIINI® until the baby bottle is at 40 ° C.
Important NOTE: Please note that the Warm-up time to the desired temperature due to different Ambient temperatures , the Bottle size (small or large baby bottle), des Bottle material (Glass or plastic) as well as the Starting temperature can lengthen or shorten.
For our Reference measurements do we have Tap water with approx. 25 ° C used. A 240 ml Baby bottle must be approx. 18 minutes (Our test showed 18 minutes and 39 seconds) be heated with LIINI® until the baby bottle is at 40 ° C.
Important NOTE: Please note that the Warm-up time to the desired temperature due to different Ambient temperatures , the Bottle size (small or large baby bottle), des Bottle material (Glass or plastic) as well as the Starting temperature can lengthen or shorten.
For our Reference measurements do we have Tap water with approx. 25 ° C used. One 120ml Baby bottle must be approx. 11 minutes (Our test showed 11 minutes and 2 seconds) with LIINI® until the baby bottle is at 45 ° C.
Important NOTE: Please note that the Warm-up time to the desired temperature due to different Ambient temperatures , the Bottle size (small or large baby bottle), des Bottle material (Glass or plastic) as well as the Starting temperature can lengthen or shorten.
For our reference measurements, we decided on an initial temperature of 25 ° C, because LIINI® is especially a gadget for on the go. As a rule, bottled mineral water or breast milk, stored in a handbag, unrefrigerated (for a short time!) And at approx. 25 ° is used for bottle preparation.
After warming up the bottle, we verified the temperature several times and with various thermometers (digital and analog). The LIINI® cup warmer has one Tolerance of approx. 2 ° C , keeping the specified temperature for the purpose of protecting the baby was only undercut, but never exceeded.
If you want to verify the temperature with another thermometer, you have to proceed as follows:
- Use the bottle warmer to heat the milk to the desired temperature (37 ° / 40 ° / 45 °) until you hear the beep
- Immediately after the beep, mix the contents of the baby bottle (circular hand movements)
- Now you can check the temperature in the middle of the contents (the typical baby stick thermometers are unsuitable. It is best to use a fever thermometer!)
- Klarna. (Invoice 30 days)
- PayPal
- Mastercard
- Visa
- TWINT (Switzerland)
No. No further fees are due for purchases in our online shop. We cover these costs 🙂
Yes, absolutely. You can order with us via Klarna. order and pay 30 days later.
Absolutely! Our servers are 100% in Switzerland and encrypted.
The product can be returned in its original packaging ( packaging seal not broken ) within 7 days of placing the order . Unfortunately, as soon as the packaging seal has been severed, we can no longer take the device back for legal reasons (hygiene items) , we would be liable to prosecution. For this reason, we provide as much information as possible on our website before any order / purchase in our webshop. In case of any uncertainties, we are always available via our support system and will answer any questions you may have.
In this case we ask you to open a ticket in our ticket system. Our employees will then immediately take care of your request. Important: If you have a problem with the device, it is really important to record the corresponding problem via video or photo. Otherwise, it is almost impossible for us to determine via remote diagnosis whether there is a problem.
You can find the ticket system at the following link: https://liini.ch/support/
We grant a two-year guarantee for all defects when used properly.
The guarantee is excluded for improper use.
If you want to return LIINI®, you must contact us in advance ticket system. For each return, a processing deduction of 15% of the order total will be deducted. This expense contribution is used to cover our additional expenses. We ask for your understanding accordingly.
In the event of a return, we will provide you with a return label. The costs for this are accordingly settled with the deduction of 15% for a return.